When you book spring repair in Manor, you get a tech who knows Travis County — Travis County is part of Texas. We serve Harris Branch and the surrounding Manor area and nearby Elgin, Pflugerville, Hornsby Bend, and Wells Branch every day.
Because Manor has a warm, humid climate of sultry summers, abundant rainfall, and damp conditions that work hard on metal hardware, the doors here age differently than inland or coastal homes elsewhere. The usual culprits are damp garages that pit galvanized parts over time, salt-tinged coastal air that accelerates rust near the shore, and high year-round humidity that rusts springs, cables, and fasteners — exactly what our techs come prepared for.
We've fixed thousands of doors around Travis County, and the pattern holds in Manor: corroded springs and cables in the humid air, moisture-tripped openers and sensors after storms, degraded weatherstripping from UV and moisture, and storm-driven debris and water in the tracks. None of it should leave you without a working garage for more than a day.
Garage door springs are the single most-loaded component on the entire system — a typical residential torsion spring stores enough energy to lift a 200-pound door dozens of times a day. When that spring fatigues or snaps, the door becomes unsafe to operate by hand and dangerous to operate with an opener. Our spring repair service replaces broken or worn springs, recalibrates door balance, and verifies the entire counter-weight system so the door lifts evenly and the opener does not strain.
We carry a full inventory of torsion springs, extension springs, and 30,000-cycle high-cycle springs sized for the most common residential door weights nationwide. Most homeowners are running 10,000-cycle springs from a builder install; upgrading to 30,000-cycle springs at replacement time costs only marginally more and triples expected lifespan. Every spring repair includes a full balance test, photo-eye verification, and an opener force/travel calibration.
Spring work is one of the few garage door repairs where DIY genuinely puts you at risk. The torque stored in a fully-wound torsion spring can release a winding bar at high velocity if the bar slips. Our techs are CSLB-licensed and carry liability coverage for spring work; calling a professional almost always costs less than an emergency-room visit.
A failed torsion spring makes a distinct sharp crack that homeowners often mistake for a gunshot or a transformer blowing. Inspect the spring above the door for a visible 2-inch gap between coils.
Door feels twice as heavy
If the door is hard to lift by hand or the opener strains and reverses partway up, the spring is undertensioned, worn, or broken. A balanced door should lift with one hand.
Door drops fast when released
Disconnect the opener and lift the door to chest height. If you let go and it slams down, the spring is no longer counter-weighting the panels correctly.
Opener motor whines but door barely moves
Modern openers protect themselves by reversing under load. A failing spring forces the motor into that protection mode and shortens the opener's life if not corrected.
Visible gap in the torsion spring coil
Healthy torsion springs are wound tight along their full length. Even a half-inch gap between coils indicates a snapped spring — call before attempting to use the door.
Common causes & what we fix
Cycle fatigue
Every open-and-close is one cycle. Builder-grade springs are rated for ~10,000 cycles — roughly 7–10 years of typical use. Heavy users (3+ cycles/day) see failure earlier.
Corrosion from coastal air
Homes in coastal see accelerated corrosion on uncoated springs. Salt-air pitting weakens the wire and triggers premature snaps.
Improper spring sizing
If a builder undersized the original springs for the door weight, the spring runs at higher stress per cycle and fails years early. We size replacements by measured door weight, not guess.
Missing lubrication
Torsion springs need a light coat of oil annually to prevent friction wear between coils. A dry spring fatigues 30–40% faster than a maintained one.
Door imbalance
Sagging panels or off-track travel transfer load unevenly to the springs, accelerating failure on the over-loaded side. Repair work should always include a balance check.
Our process
1
Call or schedule online. Book your spring repair in Manor online or by phone and pick a 2-hour window. We confirm in under 5 minutes with the assigned tech's name and photo.
2
On-site diagnosis. In Manor, the spring repair starts with a hands-on diagnosis: free for most repairs, $39 on minor service calls (waived on approval). You see the issue and the fix first.
3
Flat-rate quote. Your spring repair in Manor is quoted flat-rate and in writing up front. There's no hourly creep and no pressure: our technicians are salaried, never commissioned.
4
Same-visit fix. Expect a same-visit spring repair fix — our first-call success rate is 96%. We confirm the repair by cycling the door with you, then leave no mess behind.
How much does spring repair cost in Manor, TX?
The cost of spring repair in Manor starts at $189, locked in as a flat written rate before work begins. No commissioned up-sell, no hourly creep — and 10% off labor for seniors and military. We keep spring repair affordable across Manor, TX — one flat number quoted up front, the same one you pay at the end.
Spring Repair the United States starts at from $189, with the full spring repair price written down and locked before we start — there's no hourly meter and nothing bolted on later. We take 10% off labor for seniors (65+) and military, and jobs over $1,500 qualify for 0% APR Synchrony financing for 12 months, approved fast with no prepayment penalty.
Why homeowners in Manor, TX choose us for spring repair
Our spring repair earns repeat Manor business the hard way — durable parts for Texas's humid subtropical region, written 30-day quotes, and a decade-long workmanship guarantee. Family-run since 1974. Looking for a spring repair company in Manor, TX? That's exactly what we are — local, licensed, and accountable to Travis County.
Every spring repair is guaranteed: a 10-year workmanship warranty, held separate from the manufacturer's coverage on the parts. Should our spring repair fail because of the install, we return and correct it at no charge for ten full years. 30,000-cycle springs are warrantied for the life of the original homeowner; other parts and accessories carry standard 1–5 year terms.
We earn trust on spring repair by quoting straight — no up-sell, salaried (not commissioned) technicians, and a diagnostic structured so you see exactly what we see. When a repair is right we recommend the repair; when replacement is the smarter long game, we say that. The flat-rate spring repair quote is written and valid for 30 days.
Areas we serve for spring repair
We provide spring repair throughout Manor, TX and the surrounding Travis County area. Serving Harris Branch and surrounding neighborhoods.
A note on the area for spring repair: Travis County is part of Texas. Our Manor crews work that whole footprint daily, out to Elgin, Pflugerville, Hornsby Bend, and Wells Branch.
We anchor spring repair in Manor but work the surrounding Elgin, Pflugerville, Hornsby Bend, and Wells Branch every day, keeping response times short on every side of town. Local spring repair in Manor, TX and ZIP 78653 — same crew, same flat rate, no travel surcharge for the edges of town.
Spring Repair near you in Manor, TX
When Manor homeowners look for spring repair near them, they want someone close, fast, and accountable. That's us: CSLB-licensed, on-site in about 90 minutes, dispatched from the nearest stocked truck in Travis County.
Manor is part of our greater Austin, TX metro service area.
78653 and the surrounding blocks are all on our spring repair map. ETAs for spring repair shift with Manor traffic through the day; call and we'll quote the honest arrival window on the spot. You reach an on-call technician, not an answering machine. Searching "spring repair near me" in Manor? You've found a genuinely local Travis County crew, not a lead broker.
Frequently asked about spring repair
Top questions homeowners searching for Spring Repair near me ask us:
Yes. Travis County is part of Texas, and we work the whole footprint: Manor plus nearby Elgin, Pflugerville, Hornsby Bend, and Wells Branch. Same licensed, insured crews and 10-year workmanship guarantee county-wide.
The call we get most in Manor is corroded springs and cables in the humid air. Manor has mainly suburban houses with attached two-car garages, mixed with some older central-neighborhood homes, so moisture-tripped openers and sensors after storms turns up often too. We carry the common parts on the truck for a single-visit fix.
We strongly recommend replacing both. Springs on a dual-spring door wear at the same rate, so the second spring is statistically days or weeks from failing. Replacing both at once costs less than two separate dispatches and re-balances the system properly.
Yes — but it will work better. New springs change the door's counter-weight, so we re-program the opener's travel and force limits as part of the visit. This is included in the flat-rate price.
Standard springs are backed 5 years; 30,000-cycle springs for the life of the original homeowner. The 10-year workmanship guarantee covers the install labor itself.
For most households, yes. The extra cost over a standard 10,000-cycle spring is small compared with the labor savings of avoiding two future replacements. We back 30,000-cycle springs for the life of the original homeowner.